The Ali Bendybull for WPC/SPC Profile uses a base material of aluminium for a high quality installation.
The Ali Bendy Bull is an attractive stair nosing for curved/curtail treads and straight steps between 22mm - 25mm thickness.
The Ali Bendy Bull for WPC/SPC is available for WPC 8mm and SPC 5mm & 6.5mm. Overlap option available for use where an expansion gap is required, maximum expansion tolerance up to 6mm.
Please Note the Overlap option CANNOT be bent.
See our fitting video on Stairrods YouTube channel for Bendybull full install, Bendybull light commercial and Bendybull with WPC/SPC
Pre-drilled/countersunk at 2 61/64" centres and supplied with Spax-M self-drilling screws (do not pre-drill). Requires a T20 star bit.
Use a dim strip or strip of vinyl for an exact measure.
We advise the use of a non expanding cartridge adhesive. Flex as a secondary fixing.
We advise against mitring the Bendybull as it will produce a sharp corner. Consider Ali Wrap Nosings as an alternative.
Consider 4mm ply with thinner SPC.
For steep steps consider 4mm ply rather than 6mm to drop the height of the nosing.
PLEASE NOTE THESE ARE NOT DESIGNED FOR COMMERCIAL USE
Options for Ali Bendybull - for peeled for spc/wpc
Choice of profiles: Ali Bendybull Flush & Ali Bendybull Overlap.
Choice of finishes: Ali Antique, Ali Black, Ali Brass & Ali Chrome.
Choice of length: 90cm (36"), 180 (71") and 270cm (106")
