The Premier Two Way Ramp is an ingenious door bar suitable for use on ‘Non Porous’ floating floors and, or where underfloor heating is installed. Each ramp will accommodate two height differences by simply turning the door bar around. Two Way Ramp will give you an attractive, clean finish to your flooring. Ideal for laminates, engineered timber floors & LVT.

Choice of standard finishes: Antique Brass, Antique Bronze, Brass, Satin Brass.
Choice of specialised finishes: Brushed Chrome, Chrome, Pewter, Polished Nickel, Satin Nickel and Black.
Choice of length: 90cm (36"), 180 (71") and 270cm (106")
Choice of profile: Ramp 2-3mm (Top mm, Slope 11.5mm & Total Width Fitted 26mm approx)
                                      Ramp 4-5mm (Top mm, Slope 14.5mm & Total Width Fitted 29mm approx)
                                      Ramp 6-7mm (Top mm, Slope 17mm & Total Width Fitted 35mm approx)
                                      Ramp 8-9mm (Top mm, Slope 21mm & Total Width  Fitted 43mm approx)

two-way.jpg

Antique Brass

Black

Pewter

Antique Bronze

Brushed Chrome

Polished Nickel

Satin Nickel

Brass

Chrome

Satin Brass

Care and Maintenance  

Satin Brass and Polished Brass Trims can be left to age (oxidise) for a natural finish. However, to keep the brass looking like new these two finishes will need to be polished from time to time with a propriety brass polish. Ensure that you follow the instructions on the tin and protect your flooring during polishing.

Satin Nickel, Chrome, and Brushed Chrome These finishes will need to be polished from time to time with a propriety metal polish. Ensure that you follow the instructions on the tin and protect your flooring during polishing. 

Pewter, Antique Bronze and Antique Brass  If these finishes become contaminated and marked the only option is to polish them with a propriety metal polish and allow them to age again naturally. Ensure that you follow the instructions on the tin and protect your flooring during polishing. 

Vacuum Cleaning. Only vacuum up to the trim edge then use the soft brush attachment to vacuum along the edge of the trim, if not, the steel base plate and plastic wheels of you vacuum cleaner will scratch and mark your Premier Trim.